Unofficial Case Maker 2.1 Beta : Games

Re: Unofficial Case Maker 2.1 Beta

Wed Oct 10, 2007 2:46 am

Slezak

Wibbly wobbly timey-wimey stuff

Gender: Female

Location: In front of you

Rank: Medium-in-training

Joined: Mon Oct 08, 2007 6:42 pm

Posts: 352

I've played the case, and yes you CAN move from location to location and you can talk to the person at that location. However, the way DDR Khat cheats the "presenting evidence" system is simply to have messages saying (presented letter to Gumshoe) for instance, to simulate the evidence presenting. You don't actually present anything. Also, the way to do investigations is there is an ActionList area underneath each location (I know, I had to look for it too.) so you can make semi-decent investigation scenes with it. But you can only talk amd move. Nothing else.

Thank you for reading. I hope you have a wonderful day.
100% pure Joy.
Excellent source of puns.
Refrigerate after opening.

Re: Unofficial Case Maker 2.1 Beta

Wed Oct 10, 2007 3:15 am

ReMeDy

Gender: None specified

Rank: Suspect

Joined: Wed Jul 11, 2007 4:28 am

Posts: 7

Oh, so then I guess the ultimate question: Is it possible to make a SERIOUS court case even if you have to cut some corners and cheat a bit to do it or do you think it's impossible and it will come out too ugly?

Presenting evidence as scenery I don't mind, but does it allow you to CHOOSE which evidence FROM A WINDOW you want, like in the real game, or is that not possible? If it's not possible, could we do something where every time we press a witness, multiple choices come up at the bottom saying "present evidence" and "do not present evidence" then when someone clicks "present evidence" have more multiple choices showing maybe four or more different evidence options from Phoenix's inventory?

Re: Unofficial Case Maker 2.1 Beta

Thu Oct 11, 2007 5:12 am

Neh-ku

I'm ready Your Honor! :D

Gender: Male

Location: San Diego, CA

Rank: Medium-in-training

Joined: Sun Sep 02, 2007 12:37 am

Posts: 559

oh, you mean like choose an answer and stuff, let's see an example would be-

Phoenix-Hmm, his statement seems a bit strange
Choose an Answer:

[Press Harder]

[Leave him alone]

^ L from Death Note, but I edited it a little for me :]

Re: Unofficial Case Maker 2.1 Beta

Fri Oct 12, 2007 10:16 pm

ReMeDy

Gender: None specified

Rank: Suspect

Joined: Wed Jul 11, 2007 4:28 am

Posts: 7

Yea like that, only replace those with:

[Object]
[Do not object]

If you make those two multiple choices come up at the end of EVERY possible press statement, could you not advance the story that way? If a player picks the [Object] selection, it could pop up with maybe four choices of evidence in your inventory, such as:

[Attorney's Badge]
[Crime Scene Photo]
[Pistol]
[etc. etc.]

Three of them would be the wrong answer, thus resulting in a penalty, while one of them is the correct answer. I know it would be kinda awkward, even if it's possible, but at least it might work. If it does, a player could get away making a whole case just doing that, right?

Re: Unofficial Case Maker 2.1 Beta

Sat Oct 13, 2007 5:59 am

Slezak

Wibbly wobbly timey-wimey stuff

Gender: Female

Location: In front of you

Rank: Medium-in-training

Joined: Mon Oct 08, 2007 6:42 pm

Posts: 352

Personally, I'm trying to figure out if there's a way to make a "cross-examination" for presenting evidence as such:

CROSS EXAMINATION
-- Presenting Evidence --
-(Present my badge)
-(Present autopsy report)
-(Present murder weapon)
-(Present etc. etc.)
-(On second thought, I don't want to present anything right now.)

And have it able to be recurring and have individual values for if you have each piece of evidence, so it'd be like *receive murder weapon, set Value81 to 1, opens up that slot in the cross-examination*
I'm trying to get it so it can occur during an investigation (interrupt investigation when "present evidence" is selected as a "talk topic" and start the cross-examination, then restart the investigation...) Haven't exactly figured out how to do that though...

Thank you for reading. I hope you have a wonderful day.
100% pure Joy.
Excellent source of puns.
Refrigerate after opening.

Re: Unofficial Case Maker 2.1 Beta

Sat Oct 13, 2007 7:36 pm

Neh-ku

I'm ready Your Honor! :D

Gender: Male

Location: San Diego, CA

Rank: Medium-in-training

Joined: Sun Sep 02, 2007 12:37 am

Posts: 559

welll, DDRKhat knows what to do but he hasn't posted in a long time... :sadshoe:

^ L from Death Note, but I edited it a little for me :]

Re: Unofficial Case Maker 2.1 Beta

Mon Oct 15, 2007 3:36 pm

kashmir026

kashmir026: Ace Asshole

Gender: None specified

Rank: Suspect

Joined: Mon Oct 15, 2007 3:25 pm

Posts: 5

just a quick question...when i hit "build case," where does the .exe go? i hit it and it says 100% and then just stops doing anything. is that supposed to happen?

Re: Unofficial Case Maker 2.1 Beta

Mon Oct 15, 2007 6:20 pm

Slezak

Wibbly wobbly timey-wimey stuff

Gender: Female

Location: In front of you

Rank: Medium-in-training

Joined: Mon Oct 08, 2007 6:42 pm

Posts: 352

Could you elaborate please? Does it say "making .exe" and then load up your case or does it stop with some errors? If the .exe is being made successfully and it's loading up your case just fine, the .exe will be in your main Phoenix Wright Case Maker folder (wherever that may be). However, if it's just stopping at 100%, we will need more information.

Thank you for reading. I hope you have a wonderful day.
100% pure Joy.
Excellent source of puns.
Refrigerate after opening.

Re: Unofficial Case Maker 2.1 Beta

Tue Oct 16, 2007 1:19 pm

kashmir026

kashmir026: Ace Asshole

Gender: None specified

Rank: Suspect

Joined: Mon Oct 15, 2007 3:25 pm

Posts: 5

Quote:

Could you elaborate please? Does it say "making .exe" and then load up your case or does it stop with some errors? If the .exe is being made successfully and it's loading up your case just fine, the .exe will be in your main Phoenix Wright Case Maker folder (wherever that may be). However, if it's just stopping at 100%, we will need more information.

yeah, i'll start from the top. i open my main Phoenix Wright Case Maker folder, "pwcm", from the desktop.
then i open phoenix wright case maker.exe. this guy opens.

i click "courtrecords turnabout", just like khat said.

then, and this is prolly where i'm fubar-ing it. i click build case - build.exe.

now, you say the .exe goes to the main folder, in my case, pwcm, if i assume correctly. trouble is, only thing that appears in there is an empty folder called "Compress".

same happens with any of the other tutorials i try to load.

show me the err of my ways, o ye internet folk.

Re: Unofficial Case Maker 2.1 Beta

Tue Oct 16, 2007 3:07 pm

The Doctor

The Father of Death

Gender: Male

Location: Beavercreek, Ohio

Rank: Ace Attorney

Joined: Thu Aug 02, 2007 3:20 pm

Posts: 3049

Just wait! And wait! And wait! It'll pop up eventually.

Re: Unofficial Case Maker 2.1 Beta

Wed Oct 17, 2007 12:41 pm

kashmir026

kashmir026: Ace Asshole

Gender: None specified

Rank: Suspect

Joined: Mon Oct 15, 2007 3:25 pm

Posts: 5

The Doctor wrote:

wait! And wait! And wait!

for serious...?

but did i do everything else right?

EDIT: uh, i waited, sorta. i hit execute then let it sit for, like, hours, and got nada. so now what?

Re: Unofficial Case Maker 2.1 Beta

Thu Oct 18, 2007 12:19 am

DDRKhat

PWLib / AIGE developer

Gender: Male

Location: 127.0.0.1

Rank: Prosecutor

Joined: Tue May 01, 2007 9:27 pm

Posts: 649

Wow I really didn't expect people to still be fiddling with this. And guys, I really don't see any way at all to make a proper case with this program, no matter what way you try to cut corners.

kashmir026 wrote:

The Doctor wrote:

wait! And wait! And wait!

for serious...?
but did i do everything else right?
EDIT: uh, i waited, sorta. i hit execute then let it sit for, like, hours, and got nada. so now what?

Make sure there is no zip file or anything named the same as the project. I.E
Courtrecords Turnabout.zip <-- if that was in the same folder as the case maker, the case maker would not be able to make the .exe for the case.

If you put your mind to it, you can accomplish anything!
"(Not)Guilty" for PWLib | Emergency Case Selection Fixes
Case 1-1 for PWLib | Pearl

Re: Unofficial Case Maker 2.1 Beta

Fri Oct 19, 2007 10:57 am

Byakko

I'm in your skies; raeping your balloons

Gender: None specified

Rank: Medium-in-training

Joined: Fri Oct 12, 2007 4:18 am

Posts: 561

Hey, I've downloaded the Case Maker over 2 times, and each time it's corrupted =(

I despite MediaFire, but I'm guessing not using my FlashGet would help? But considering the stupid speeds I'm getting WITH it already...

Re: Unofficial Case Maker 2.1 Beta

Mon Oct 29, 2007 12:15 am

Narukari

Ace Defendant

Gender: None specified

Rank: Suspect

Joined: Wed Sep 19, 2007 8:31 pm

Posts: 2

Byakko: I had the exact same problem when I first tried to download it, just give it a day or two, then try and download it again, I'm pretty sure that its a problem with the host.

edit: I just tried the download and It opened and extracted perfectly.

Re: Unofficial Case Maker 2.1 Beta

Tue Oct 30, 2007 3:31 am

Byakko

I'm in your skies; raeping your balloons

Gender: None specified

Rank: Medium-in-training

Joined: Fri Oct 12, 2007 4:18 am

Posts: 561

Narukari wrote:

Byakko: I had the exact same problem when I first tried to download it, just give it a day or two, then try and download it again, I'm pretty sure that its a problem with the host.

edit: I just tried the download and It opened and extracted perfectly.

Thanks for the heads-up! I'm trying to d/l it again now =)

Re: Unofficial Case Maker 2.1 Beta

Thu Nov 01, 2007 4:43 pm

bluebadger88

hate WWWS: wicked witch of witness stand

Gender: Male

Rank: Suspect

Joined: Sat Sep 22, 2007 7:07 pm

Posts: 23

im having some troubles with the new version my first and formost on is i can no longr add characters! i do the exact same thing i did in the otherversion and yet i come up with a much more simple error message in stead of could not find blah balh / blah you know what i mean it just says could not fing end of story currently i have tried placing all my projectdata in a seperate folder inside the projects folder then i tried having it all inside the projects alone and finally i tried putting in the casemaker folder and then i got

the most recent message

please help i feel cursed :sadshoe:

i made a smiley because sigs are for squares ( lame excuse for no paintshop skillz) :larry:

Re: Unofficial Case Maker 2.1 Beta

Sat Nov 03, 2007 3:07 am

MasterOfMisplacement

Where did that ID card go...?

Gender: Male

Rank: Suspect

Joined: Sun Oct 21, 2007 9:49 pm

Posts: 4

I have the DUMBEST poblem ever.

I don't know where to put the projects folder... :payne:

Re: Unofficial Case Maker 2.1 Beta

Wed Nov 14, 2007 1:14 am

Gamerelite1

Gender: None specified

Rank: Suspect

Joined: Sat Jun 30, 2007 2:51 am

Posts: 36

I hope someone picks this up and furthers it.

Re: Unofficial Case Maker 2.1 Beta

Wed Nov 14, 2007 1:38 am

Prosecutor Edgeworth

I will find you guilty...!

Gender: None specified

Rank: Suspect

Joined: Fri Oct 26, 2007 2:50 am

Posts: 7

Obviously I'll sound stupid for this but.
When ever I make a case and want to put a character in the resources, I don't understand how exactly to do that. So my question... How do I import resources to be used?

Re: Unofficial Case Maker 2.1 Beta

Fri Nov 16, 2007 12:50 am

beamer

Gender: None specified

Rank: Suspect

Joined: Fri Nov 16, 2007 12:42 am

Posts: 2

I got this just recently and noticed that the program comes with the right and left deskFRONT files, but not a witness standFRONT file. I tried to make one (using the court record sprite) by deleting the green, but just the desk shows up. I tried making the background gray (192 192 192), but that didn't work. Finally, I used powerpoint to set the background as transparent, but apparently, that makes the WHOLE picture transparent. Any help would be appreciated.

Re: Unofficial Case Maker 2.1 Beta

Fri Nov 16, 2007 5:55 am

ParrotMan01

Gender: Male

Location: Nevada

Rank: Ace Attorney

Joined: Sat Sep 01, 2007 2:11 am

Posts: 2739

Wow...Mr. DDRkaht hasn't been on in so long...I wonder if any of these questions by the new people will get answered.

Don't mind me, just passing through.

Re: Unofficial Case Maker 2.1 Beta

Fri Nov 16, 2007 8:30 am

DDRKhat

PWLib / AIGE developer

Gender: Male

Location: 127.0.0.1

Rank: Prosecutor

Joined: Tue May 01, 2007 9:27 pm

Posts: 649

bluebadger88 wrote:

im having some troubles with the new version my first and formost on is i can no longr add characters! i do the exact same thing i did in the otherversion and yet i come up with a much more simple error message in stead of could not find blah balh / blah you know what i mean it just says could not fing end of story currently i have tried placing all my projectdata in a seperate folder inside the projects folder then i tried having it all inside the projects alone and finally i tried putting in the casemaker folder and then i got

the most recent message

please help i feel cursed :sadshoe:

Remember that this is very sensitive about Cases. PhoeniX isn't the same as phoenix for example. Hope this helps. Remember that it goes inside the folder of the case your making

Gamerelite1 wrote:

I hope someone picks this up and furthers it.

I've been trying to reverse engineer this but I cannot disassemble the case maker at all.. If somebody could give me a disassembly I could probably at least finish the Cross Examination so you can present evidence.

Prosecutor Edgeworth wrote:

Obviously I'll sound stupid for this but.
When ever I make a case and want to put a character in the resources, I don't understand how exactly to do that. So my question... How do I import resources to be used?

I'll give you an example how to import characters, the rest should be self-explanatory.
Case: The Unforseen Turnabout
Then you look in here --> \Case maker 2.01b\Projects\The Unforseen Turnabout\
Theres a nice "Characters" folder Inside there make a folder with the EXACTLY correct name
i.e "Butz"
Inside the Butz folder, put all your Larry GIFS. Now make the character inside The Case maker and where it says "Filename:" put the name of the folder you made, "Butz" in this case.

beamer wrote:

I got this just recently and noticed that the program comes with the right and left deskFRONT files, but not a witness standFRONT file. I tried to make one (using the court record sprite) by deleting the green, but just the desk shows up. I tried making the background gray (192 192 192), but that didn't work. Finally, I used powerpoint to set the background as transparent, but apparently, that makes the WHOLE picture transparent. Any help would be appreciated.

Check the backgrounds inside my case. I'm pretty sure it'll have what you're looking for. If not. Use the program: GraphicsGale You might have to pay for it or get a friend to pass it onto you but it's the only GIF program I found that actually does transparency properly that will work with this case maker. Infact reading over what you just asked for properly, I KNOW I have a witness front "courtstandFRONT.PNG"

Bleachlover wrote:

Wow...Mr. DDRkaht hasn't been on in so long...I wonder if any of these questions by the new people will get answered.

I didn't expect people to still be experimenting and getting used to using a case maker that cannot fully emulate a case. I suppose it's morbid curiousity.

If you put your mind to it, you can accomplish anything!
"(Not)Guilty" for PWLib | Emergency Case Selection Fixes
Case 1-1 for PWLib | Pearl

Re: Unofficial Case Maker 2.1 Beta

Fri Nov 16, 2007 9:51 pm

beamer

Gender: None specified

Rank: Suspect

Joined: Fri Nov 16, 2007 12:42 am

Posts: 2

Quote:

Check the backgrounds inside my case. I'm pretty sure it'll have what you're looking for. If not. Use the program: GraphicsGale You might have to pay for it or get a friend to pass it onto you but it's the only GIF program I found that actually does transparency properly that will work with this case maker. Infact reading over what you just asked for properly, I KNOW I have a witness front "courtstandFRONT.PNG"

I'm not sure what you mean by your case. But I checked all of the tutorial projects and couldn't find a witness stand. as for GraphicsGale, I selected the background color and set is as transparent, but that just makes the background white in the case maker. Plus, I thought I read somewhere that transparency doesn't work for backgrounds, only for characters , scenery, etc. Any idea what I should do? or where I could get a proper Witness standFRONT pic? (where is your case?)

Re: Unofficial Case Maker 2.1 Beta

Sun Nov 18, 2007 12:25 am

Gamerelite1

Gender: None specified

Rank: Suspect

Joined: Sat Jun 30, 2007 2:51 am

Posts: 36

God damn! Whenever I try making the EXE it starts going into not responding mode.

Re: Unofficial Case Maker 2.1 Beta

Sun Nov 18, 2007 3:41 am

Gamerelite1

Gender: None specified

Rank: Suspect

Joined: Sat Jun 30, 2007 2:51 am

Posts: 36

DDRKhat wrote:

I didn't expect people to still be experimenting and getting used to using a case maker that cannot fully emulate a case. I suppose it's morbid curiousity.

actually I'm using it to memorize stuff.

Re: Unofficial Case Maker 2.1 Beta

Sun Nov 18, 2007 6:26 am

ParrotMan01

Gender: Male

Location: Nevada

Rank: Ace Attorney

Joined: Sat Sep 01, 2007 2:11 am

Posts: 2739

Hey man/girl be careful about double posting, okay? Anyway, curiosity...I would suggest google to people who would want to know about the case maker that are yet members.

Don't mind me, just passing through.

Re: Unofficial Case Maker 2.1 Beta

Sun Nov 18, 2007 1:49 pm

Gamerelite1

Gender: None specified

Rank: Suspect

Joined: Sat Jun 30, 2007 2:51 am

Posts: 36

Bleachlover wrote:

Hey man/girl be careful about double posting, okay? Anyway, curiosity...I would suggest google to people who would want to know about the case maker that are yet members.

I normally don't double post but this program makes me ask a lot of questions. :sadshoe:

Re: Unofficial Case Maker 2.1 Beta

Sun Nov 18, 2007 2:59 pm

Marshmello

I know, Wright?

Gender: Female

Location: Helluva-fax, New Scottishland

Rank: Prosecutor

Joined: Sun Nov 18, 2007 2:50 pm

Posts: 806

Woo first post :redd:

Anyways...

Gamerelite1 wrote:

God damn! Whenever I try making the EXE it starts going into not responding mode.

I have the same problem, but it only happens on cases that I've made. The tutorials and whatnot are fine when I build the .exe's, but whenever I try it on my case it loads to 100% and says "Making .exe" and then the program stops responding.

Can anyone help?

Re: Unofficial Case Maker 2.1 Beta

Sun Nov 18, 2007 3:34 pm

Gamerelite1

Gender: None specified

Rank: Suspect

Joined: Sat Jun 30, 2007 2:51 am

Posts: 36

Marshmello wrote:

Woo first post :redd:

Anyways...

Gamerelite1 wrote:

God damn! Whenever I try making the EXE it starts going into not responding mode.

I have the same problem, but it only happens on cases that I've made. The tutorials and whatnot are fine when I build the .exe's, but whenever I try it on my case it loads to 100% and says "Making .exe" and then the program stops responding.

Can anyone help?

Actually I've figured out what to do. Wait. It takes a couple minutes then it loads up your case, and can anyone help me on how to make a cross-ex?

Re: Unofficial Case Maker 2.1 Beta

Mon Nov 19, 2007 9:54 am

DDRKhat

PWLib / AIGE developer

Gender: Male

Location: 127.0.0.1

Rank: Prosecutor

Joined: Tue May 01, 2007 9:27 pm

Posts: 649

beamer wrote:

I'm not sure what you mean by your case.
....
Any idea what I should do? or where I could get a proper Witness standFRONT pic? (where is your case?)

Look inside of my signature and click the SHOW button. It will download the project files for the case I began to make to demonstrate the capabilities of this case maker, of course that was up until MechaBowser had his internet removed for hacking online games.

If you put your mind to it, you can accomplish anything!
"(Not)Guilty" for PWLib | Emergency Case Selection Fixes
Case 1-1 for PWLib | Pearl

Re: Unofficial Case Maker 2.1 Beta

Mon Nov 19, 2007 9:35 pm

Marshmello

I know, Wright?

Gender: Female

Location: Helluva-fax, New Scottishland

Rank: Prosecutor

Joined: Sun Nov 18, 2007 2:50 pm

Posts: 806

Gamerelite1 wrote:

Wait. It takes a couple minutes then it loads up your case

How many minutes is "a couple"? I posted my problem after I had waited well over an hour for it to create an .exe, and yesterday I tried it without any programs running in the background, without clicking anything, etc etc, and after 20 minutes it still hadn't made the .exe. It seems to work fine up until the Rage.exe command prompt thing is done, but after that the program stops responding. Again, this only happens on cases that I've made -- the ones I've downloaded work fine.

On an entirely different note, has anyone else had problems with their computers slowing down or whatever? I'm running PWCM on a laptop, and for the first little while it was fine. But recently Windows Explorer (what you view folders with) has been running extremely slowly (especially with folders containing pictures), I can't paste anything directly into problem folders, and I have to use the Task Manager to exit. I suspect it has something to do with the Mp3-to-Ogg thingy, but I can't be sure (I uninstalled it after using it to convert the soundtrack). Does Mp3-to-Ogg come with background programs or spyware or whatever that might have caused this? How can I get my laptop running normally again?

Re: Unofficial Case Maker 2.1 Beta

Mon Nov 19, 2007 10:15 pm

DDRKhat

PWLib / AIGE developer

Gender: Male

Location: 127.0.0.1

Rank: Prosecutor

Joined: Tue May 01, 2007 9:27 pm

Posts: 649

Marshmello wrote:

Gamerelite1 wrote:

Wait. It takes a couple minutes then it loads up your case

How many minutes is "a couple"? I posted my problem after I had waited well over an hour for it to create an .exe, and yesterday I tried it without any programs running in the background, without clicking anything, etc etc, and after 20 minutes it still hadn't made the .exe. It seems to work fine up until the Rage.exe command prompt thing is done, but after that the program stops responding. Again, this only happens on cases that I've made -- the ones I've downloaded work fine.

On an entirely different note, has anyone else had problems with their computers slowing down or whatever? I'm running PWCM on a laptop, and for the first little while it was fine. But recently Windows Explorer (what you view folders with) has been running extremely slowly (especially with folders containing pictures), I can't paste anything directly into problem folders, and I have to use the Task Manager to exit. I suspect it has something to do with the Mp3-to-Ogg thingy, but I can't be sure (I uninstalled it after using it to convert the soundtrack). Does Mp3-to-Ogg come with background programs or spyware or whatever that might have caused this? How can I get my laptop running normally again?

You should always scan programs before installing them onto your machine.
As for you being unable to compile the case;
Check there is no "Compress" folder, if so delete it.
Check there are no files named the same as your project inside the projects folder (this sounds dumb, but I use win-rar to create zips, it generates them in the same folder, then the case maker gets confused)

If you put your mind to it, you can accomplish anything!
"(Not)Guilty" for PWLib | Emergency Case Selection Fixes
Case 1-1 for PWLib | Pearl

Re: Unofficial Case Maker 2.1 Beta

Mon Nov 19, 2007 10:18 pm

freyathedark

Diego and Mia forever

Gender: Female

Location: USA

Rank: Decisive Witness

Joined: Fri Nov 09, 2007 2:07 am

Posts: 256

...
...
...
<stabbity death> Noooo!!! It won't let me download it T_T Stupid thing says the link is broken or something... is there another site I can download it from? Or should I just keep trying?

EDIT: Got it to download... now I just need to make it work... :nick:

Daughter of Xero Wright
Married to andrx
Sister to Jenna Darknight, Nego, Millini, and Dahlia
VP and Founder of the DarzieP fanclub

Last edited by freyathedark on Mon Nov 19, 2007 11:21 pm, edited 1 time in total.

Re: Unofficial Case Maker 2.1 Beta

Mon Nov 19, 2007 10:58 pm

AngryAsianAce

What?

Gender: None specified

Rank: Decisive Witness

Joined: Sun Nov 18, 2007 10:28 am

Posts: 228

Cool, Ill have to check this program out a lil later.

http://www.youtube.com/AngryAsianAce

Re: Unofficial Case Maker 2.1 Beta

Tue Nov 20, 2007 12:28 am

Marshmello

I know, Wright?

Gender: Female

Location: Helluva-fax, New Scottishland

Rank: Prosecutor

Joined: Sun Nov 18, 2007 2:50 pm

Posts: 806

DDRKhat wrote:

You should always scan programs before installing them onto your machine.

I suppose, but I'm lazy and assumed it was safe because it was MechaBowser who suggested it. But I don't even know if it was that program that was causing the problem. Does anyone know how I can find out?

Re: Unofficial Case Maker 2.1 Beta

Tue Nov 20, 2007 6:50 am

Slezak

Wibbly wobbly timey-wimey stuff

Gender: Female

Location: In front of you

Rank: Medium-in-training

Joined: Mon Oct 08, 2007 6:42 pm

Posts: 352

Hey everyone! I've made a little tutorial that details the way Case Maker handles GIFs. I think it's quite informative. If you find any faults with it, please let me know. All the files are included. (3 backgrounds, 4 character sprites, 1 sound, 1 .exe files, and a readme file.)
ENJOY!

http://www.sendspace.com/file/z8cl3w

Thank you for reading. I hope you have a wonderful day.
100% pure Joy.
Excellent source of puns.
Refrigerate after opening.

Re: Unofficial Case Maker 2.1 Beta

Tue Nov 20, 2007 1:51 pm

Byakko

I'm in your skies; raeping your balloons

Gender: None specified

Rank: Medium-in-training

Joined: Fri Oct 12, 2007 4:18 am

Posts: 561

Gack! I'm still having trouble downloading the bloody thing without some kind of 'missing archive' =/

Damn you Mediafire. Damn you to HECK!

(It's the only download file service I have EVER had trouble with, ugh)

Re: Unofficial Case Maker 2.1 Beta

Tue Nov 20, 2007 8:07 pm

DaemonForce

It's stuck?

Gender: Male

Location: Olympia, WA

Rank: Ace Attorney

Joined: Tue Nov 20, 2007 4:29 pm

Posts: 2107

I just found this neato thing last night. ♥!

N-Mario wrote:

With this one, you can do testimonies, cross-examinations, & investigations. Only problem is, no profile options, & you can't present evidence at cross-examinations. But you still can end them though, through pressing witnesses.

HOLD IT! :hobohodo:

I have yet to run into this. Can you explain how this happens?

Tajiri Ami wrote:

Thanks, I appreciate it! What a shame that this project seems to have hit a brick wall.

It's not the project that has hit a wall. :garyuu:

BigFish wrote:

Also, look at "STUFF.lua", too see some interesting things used internally by the program. If you could access some MF functions inside this Lua script, then you could hypothetically add new features!

It's not hypothetical.

DDRKhat wrote:

read through my source carefully

I greatly advise this.

Steel Samurai wrote:

Gaaah! This means that I´am a complete newbie when I thought that I could do something on my own! :ack:

Nah...You just need a push in the right direction. :godot:

DDRKhat wrote:

Everything to do with your case that you want has to be inputted, apart from the interface the player uses to navigate through the game. Even sounds.

This is the best part of the case maker and the only reason I'm using it. ♥

Magma wrote:

Just wondering...Is someone working on a better version of case maker?

Do you want someone to?

Has anyone made something from case maker yet?

Oh yeah, by something I mean good. :keiko:

Lana_Skyes_Heart wrote:

SO I was stuck all day inside the changing room with nothing but a glued on bra.

Panty thief strikes again! :-P

Re: Unofficial Case Maker 2.1 Beta

Tue Nov 20, 2007 8:48 pm

Marshmello

I know, Wright?

Gender: Female

Location: Helluva-fax, New Scottishland

Rank: Prosecutor

Joined: Sun Nov 18, 2007 2:50 pm

Posts: 806

DDRKhat wrote:

As for you being unable to compile the case;
Check there is no "Compress" folder, if so delete it.
Check there are no files named the same as your project inside the projects folder (this sounds dumb, but I use win-rar to create zips, it generates them in the same folder, then the case maker gets confused)

There was a Compress folder and a file named similarly to my case and I deleted them, but unfortunately that didn't help. I'm going to reinstall, to see if that might work.

I also believe that it is not Windows Explorer that's screwing up now, but just certain files. On the same day that I downloaded Mp3-to-Ogg, I downloaded backgrounds, evidence, and 'scenery' ("Objection!" bubbles and such) from this site. As far as I've tested, the folders I've had the most problem with are the ones that contain those files, and I cannot open any of those files (clicking on them does nothing, and opening them in another program makes that program stop responding). Has anyone else had problems with Court-Records sprites, or is the problem stemming from simply the fact that the folders in question are image-heavy?

Re: Unofficial Case Maker 2.1 Beta

Tue Nov 20, 2007 8:58 pm

javad

Haruhi MY LOVE

Gender: Male

Location: In japan with haruhi!!!

Rank: Desk Jockey

Joined: Sat Nov 03, 2007 7:36 pm

Posts: 144

i have a problem with the rage.exe

HARUHI!!!!!!!