Page 1 of 1[ 13 posts ]
The unrealized? GS3 courtroom characters, through OAM viewer
Video Game Veteran / M.U.G.E.N.
Gender: Male
Location: My House
Rank: Medium-in-training
Joined: Sat Apr 21, 2007 5:36 pm
Posts: 473
In other words, I've done some minor testing. I loaded up GS3 in my GBA emulator. During the courtroom scene, went into VBA's OAM viewer, and placed all the parts of the sprites together that were shown underneath the tables. This is the result I have for the sprites of Young Mia. (Her 'Objection' pointing finger sprite extended is more noticeable, with the belt.)
Spoiler: GS3/PW-T&T Young Mia (EXTENDED)
Another thing I noticed when I was ripping these threough OAM viewer, is that her table slamming hands are separated from her sprite. This is probably why the hands move up and down, while the sprite stays in place.
I know this sheet is lackig the zoom image of Young Mia, but I'm waiting for the DS release of GS3/PW-T&T for that extention.
BTW, I had an interest, or idea to extend Young Miles Edgeworth sprites as well. Since I see his extended parts below the table are lacking in the spriet sheet & animations. Other than that, perhaps I can see what I can extend/rip for Godot under the prosecution table.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Gender: None specified
Rank: Decisive Witness
Joined: Sat Mar 10, 2007 5:42 pm
Posts: 294
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Am I allowed to smoke in court?
Gender: Female
Location: Under Edgey's bed sheets
Rank: Medium-in-training
Joined: Thu May 17, 2007 1:27 pm
Posts: 354
I are a
supporter.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
nuuuuu, stoooooop
Gender: Female
Location: America
Rank: Admin
Joined: Fri Feb 23, 2007 5:16 am
Posts: 5255
I haven't updated CR with them 'cause T&T is coming out in only a few months, and by then they'll have even longer extensions on them, so it seems silly to update only to have to do it again fairly soon.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Hi
Gender: None specified
Rank: Decisive Witness
Joined: Tue Feb 27, 2007 5:41 pm
Posts: 240
Croik wrote:
and by then they'll have even longer extensions on them, so it seems silly to update only to have to do it again fairly soon.
Eh, I doubt it to be honest. They don't need to make them longer since what's under the bench isn't shown anyway.
The only difference I can see possibly happening is that the objection point won't have part of the sleeve cut off (bottom left of the sprite), but since that's below the bench anyway they'd probably ignore it.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Video Game Veteran / M.U.G.E.N.
Gender: Male
Location: My House
Rank: Medium-in-training
Joined: Sat Apr 21, 2007 5:36 pm
Posts: 473
Croik wrote:
I hate to say it, but these are already up on Deufeufeu's site ^^;;.
I haven't updated CR with them 'cause T&T is coming out in only a few months, and by then they'll have even longer extensions on them, so it seems silly to update only to have to do it again fairly soon.
I haven't updated CR with them 'cause T&T is coming out in only a few months, and by then they'll have even longer extensions on them, so it seems silly to update only to have to do it again fairly soon.
Oh really? I thought his page only had PW1 and PW2 sprites up?
Last I checked, I couldn't find the GS3 section.
Also, the only 'extensions' I could see happening for the DS versions are the left and right parts of the sprite. I would imagine the bottom parts would remain the same.
And I had almost finished extending Young Miles Edgeworth sprites. But since you say they are already up on the site (which I don't see anywhere) I assume it would be pointless to post them?
Re: The unrealized? GS3 courtroom characters, through OAM viewer
nuuuuu, stoooooop
Gender: Female
Location: America
Rank: Admin
Joined: Fri Feb 23, 2007 5:16 am
Posts: 5255
But I'm pretty sure that Phoenix's DS sprites are a bit taller than even his benchless ones, since the benches themselves are taller on DS. I'll have to ask Mikker, though, he did most of the extensions.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Struck by a blunt objection
Gender: Male
Location: Denmark
Rank: Ace Attorney
Joined: Sun Feb 25, 2007 5:12 pm
Posts: 1472
What I did, though, was to remove the benches. the OAM viewer can't sort off the bench on the DS versions, so I didn't think it could on the GBA.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Video Game Veteran / M.U.G.E.N.
Gender: Male
Location: My House
Rank: Medium-in-training
Joined: Sat Apr 21, 2007 5:36 pm
Posts: 473
Mikker wrote:
I.... thought.... I already ripped them.
What I did, though, was to remove the benches. the OAM viewer can't sort off the bench on the DS versions, so I didn't think it could on the GBA.
What I did, though, was to remove the benches. the OAM viewer can't sort off the bench on the DS versions, so I didn't think it could on the GBA.
So, you removed them to get the extentions of the characters? How would you do that? Use a cheat program, and find a value that displays the tables, and change them to make them dissapear? Or is it mainly you changed the offset positions of the tables?
BTW, you removed them in the GBA version, or the DS version of PW1 or PW2?
Yea, the DS's OAM viewer is completely different from GBA's OAM viewer, which is why I thought it was little easier to work with the GBA's OAM viewer, after putting the pieces back together. But if you were able to remove the tables form the screen, that would seem to work much better.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Hi
Gender: None specified
Rank: Decisive Witness
Joined: Tue Feb 27, 2007 5:41 pm
Posts: 240
Croik wrote:
They were before... his page has changed a few times, they might not be there anymore... hmmmm.
But I'm pretty sure that Phoenix's DS sprites are a bit taller than even his benchless ones, since the benches themselves are taller on DS. I'll have to ask Mikker, though, he did most of the extensions.
But I'm pretty sure that Phoenix's DS sprites are a bit taller than even his benchless ones, since the benches themselves are taller on DS. I'll have to ask Mikker, though, he did most of the extensions.
All they'd really have to do is move the sprites up. They're floating on the GBA game anyway, there's no point in adding pixels when nobody's going to see them anyway. Just a waste of space.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Video Game Veteran / M.U.G.E.N.
Gender: Male
Location: My House
Rank: Medium-in-training
Joined: Sat Apr 21, 2007 5:36 pm
Posts: 473
As I've noticed, while the BG and characters shake, the tables or witness stand do NOT shake. That's probably why the lower part of the bodies are needed.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
nuuuuu, stoooooop
Gender: Female
Location: America
Rank: Admin
Joined: Fri Feb 23, 2007 5:16 am
Posts: 5255
rtsmarty wrote:
All they'd really have to do is move the sprites up. They're floating on the GBA game anyway, there's no point in adding pixels when nobody's going to see them anyway. Just a waste of space.
Must...have...all...pixels...!!!!!
I really appreciate you guys' effort, but I don't intend to update the GS3 sprites until T&T comes out, and do them all together then.
Re: The unrealized? GS3 courtroom characters, through OAM viewer
Struck by a blunt objection
Gender: Male
Location: Denmark
Rank: Ace Attorney
Joined: Sun Feb 25, 2007 5:12 pm
Posts: 1472
N-Mario wrote:
Mikker wrote:
I.... thought.... I already ripped them.
What I did, though, was to remove the benches. the OAM viewer can't sort off the bench on the DS versions, so I didn't think it could on the GBA.
What I did, though, was to remove the benches. the OAM viewer can't sort off the bench on the DS versions, so I didn't think it could on the GBA.
So, you removed them to get the extentions of the characters? How would you do that? Use a cheat program, and find a value that displays the tables, and change them to make them dissapear? Or is it mainly you changed the offset positions of the tables?
BTW, you removed them in the GBA version, or the DS version of PW1 or PW2?
All 3 of them.
I used a graphics hacking program and made the bench sprites transparant-color-only.
Page 1 of 1
[ 13 posts ]
Who is online
Users browsing this forum: No registered users and 29 guests
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
News